0948279988
Products  Testing Equipments footwear industry

Velcro Fatigue Tester

Model: H019
Producer: HiLAB-Portugal
Giá: Contact
 Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Ứng dụng sản phẩm

  •  Simulate the use of the “Velcro” by repeated closing and opening, before performing other physical tests, according EN ISO 22776; SATRA TM123.

Thông số kỹ thuật

The main characteristics are:
• Easy assemble of the samples.
• Four different sets of masses to compose
the load between drums, according to
sample width.
• Auto reverse rotation facility to allow
that drums reverse the rotation every 30
seconds, as specified by standard.
- All pieces of this machine that are contacting with test sample are made from stainless steel or
aluminum and strong enough to avoid bend during test.
- This machine, as all our machines, are projected and produced according to all international safety
regulations.

Tiêu chuẩn

  • EN ISO 22776;
  • SATRA TM123.

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Whole Shoe Flexometer with 4 stations
Model: H009
Producer: HiLAB-Portugal
  • Assess the resistance of complete footwear to repeated flexing, in dry conditions and at room temperature, according to EN ISO 24266: Met. A (SATRA TM92). This test determines the fatigue durability and service life by simulating the walking
Buy product
Dynamic Water-Resistance Tester
Model: H054
Producer: HiLAB-Portugal
  • The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.
Buy product
Longitudinal/Torsional Stiffness of insole back parts and shanks
Model: H030
Producer: HiLAB-Portugal
  • Determine the stiffness of steel shanks, used as reinforcement in footwear 
Buy product
Ankle Shock Absorption Tester
Model: H082
Producer: HiLAB-Portugal
  • The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.
Buy product
Rigidity Tester for soles
Model: H012
Producer: HiLAB-Portugal
  • Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.
Buy product
Thickness Measuring Gauge for leather
Model: H046/1
Producer: HiLAB-Portugal
  • Used to measure the thickness of leather panels, measure the thickness of details in leather products to calculate the increase or decrease in product thickness.
Buy product
ROSS Flexometer
Model: H014
Producer: HiLAB-Portugal
  • Determine the resistance of polymeric materials to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to ISO 4643:Annex C; ISO 5423:Annex C; ASTM D1052.
Buy product
Lace to Eyelet Abrasion Tester with 6 stations
Model: H068
Producer: HiLAB-Portugal
  • Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.
Buy product
Vamp Flexometer with 12 stations
Model: H010
Producer: HiLAB-Portugal
  • Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25
Buy product
Radiant Heat Tester
Model: H048
Producer: HiLAB-Portugal
  • Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.
Buy product
Leather Grain Crack Tester
Model: H076
Producer: HiLAB-Portugal
  • Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...
Buy product
Martindale Abrasion Tester with 9 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.
Buy product
BENNEWART Flexometer
Model: H011
Producer: HiLAB-Portugal
  •  Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Toe Caps Impact Tester
Model: H081
Producer: HiLAB-Portugal
  • Machine is controlled by a PLC and the dialog between operator and machine is made through a console.
  • Changing tools (striker or clamping device) is a very easy and quick operation
Buy product
Rotating Rub Fastness Tester
Model: H065
Producer: HiLAB-Portugal
  • Machine is supplied complete with cutting die to cut the samples.
Buy product
Crockmeter Tester hand driven
Model: H066
Producer: HiLAB-Portugal
  • This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
  • The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Circular Blade Cutting Resistance Tester
Model: H071
Producer: HiLAB-Portugal
  • The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube