Longitudinal/Torsional Stiffness of insole back parts and shanks

Vamp Flexometer with 12 stations

Model: H010

Producer: HiLAB-Portugal

Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25

Buy product

Heat Insulation Tester

Model: H028

Producer: HiLAB-Portugal

This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.

Buy product

BENNEWART Flexometer

Model: H011

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to cut growth during repeated flexing. It is also suitable to assess the effect of surface patterns, according to EN ISO 20344:8.6; ISO 17707.

Buy product

Leakproofness Tester

Model: H055

Producer: HiLAB-Portugal

Leak tester measures the resistance permeability of protective gloves and protective shoes, especially PVC boots used to measure air permeability...

Buy product

Electrical Conductivity Tester

Model: H077

Producer: HiLAB-Portugal

Basically, the test consists of measuring the electric resistance of the sole complex, between the bottom surface and the inside of the footwear.

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

Elastics Repeated Extension Tester

Model: H017

Producer: HiLAB-Portugal

Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.

Buy product

Heel Fatigue Tester

Model: H084

Producer: HiLAB-Portugal

The machine is controlled by a touch screen, through which is inserted the test parameters.
An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.

Buy product

Electronic Lastometer

Model: H020

Producer: HiLAB-Portugal

Used to analyze the static properties of tensile and compression, bending, shearing, peeling, tearing, retaining, retarding, reciprocating, etc.

Buy product

Rub Fastness Tester with 2 stations

Model: H064

Producer: HiLAB-Portugal

Machine has a lateral displacement device which allows perform two tests in each sample, without need move the samples, when is used only one finger test.

Buy product

Heat Resistance Tester

Model: H027

Producer: HiLAB-Portugal

The machine is supplied complete with necessary accessories to perform the test. Temperature is controlled with accuracy demanded by standard, due to a temperature controller with PID system.

Buy product

Blade Cutting Resistance Tester

Model: H073

Producer: HiLAB-Portugal

The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...

Buy product

Leather Grain Crack Tester

Model: H076

Producer: HiLAB-Portugal

Leather grain crack tester for non-destructive testing of mass-produced and semi-finished components, parts for cracks, ...

Buy product

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Heel Impact Tester

Model: H085

Producer: HiLAB-Portugal

Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.

Buy product

BATA BELT Flexing Tester

Model: H013

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133

Buy product

Slip Resistance Tester

Model: H080

Producer: HiLAB-Portugal

A special control and data acquisition system designed for this application allows creating and storing test methods. The calculations are automatically made and can be verified based on individual values acquired by the system. The results of each individual test run are stored in the database which allows the generation of multiple graphs and a test report. As all test dates are individually stored in the database, is possible, any time, to edit each test, reanalyze it and if requested make new test runs.

Buy product

Longitudinal/Torsional Stiffness of complete footwear

Model: H031

Producer: HiLAB-Portugal

This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

BALLY Penetrometer

Model: H033

Producer: HiLAB-Portugal

The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...

Buy product

Longitudinal/Torsional Stiffness of insole back parts and shanks

Ứng dụng sản phẩm

Thông số kỹ thuật

Tiêu chuẩn

Video