0948279988
Products  Testing Equipments footwear industry

Radiant Heat Tester

Model: H048
Producer: HiLAB-Portugal
Giá: Contact
Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Ứng dụng sản phẩm

  • The tests are performed on single or multi-layer textiles intended to be used in heat protective clothing.

Thông số kỹ thuật

  • The time required for the temperature read by the calorimeter to rise by 12 ° C (t12) and 24 ° C (t24) is then recorded.
  • The source of radiant heat is a compact block with six special resistances supported by a structure of high isolating material.
  • The system controls the heat radiation, the time of the exposure and temperature, etc.
  • All parameters can be inserted through the console and all test results are displayed after the test.
  • The program has a routine to make the equipment calibration, allowing the definition of the distance correspondent to each level of the energy (5, 10, 20, 40, 80 Kw/m²).

Tiêu chuẩn

  • EN ISO 6942.

Video

Please contact us for advice and support
⇒  Mr. Ba: 0948.27.99.88

⇒  Or leave a message and we will call you directly. Thank you very much!
Other products
Rub Fastness Tester with 2 stations
Model: H064
Producer: HiLAB-Portugal
  • Machine has a lateral displacement device which allows perform two tests in each sample, without need move the samples, when is used only one finger test.
Buy product
Water Vapour Permeability Tester
Model: H050
Producer: HiLAB-Portugal
  • The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...
Buy product
Wear and Corrosion Apparatus
Model: H063
Producer: HiLAB-Portugal
  • Like other types of abrasion testing equipment, this equipment is also used to test surface durability or in other words...
Buy product
Lace to Eyelet Abrasion Tester with 6 stations
Model: H068
Producer: HiLAB-Portugal
  • Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.
Buy product
Heat Insulation Tester
Model: H028
Producer: HiLAB-Portugal
  • This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.
Buy product
Leakproofness Tester
Model: H055
Producer: HiLAB-Portugal
  • Leak tester measures the resistance permeability of protective gloves and protective shoes, especially PVC boots used to measure air permeability...
Buy product
BATA BELT Flexing Tester
Model: H013
Producer: HiLAB-Portugal
  • Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133
Buy product
Blade Cutting Resistance Tester
Model: H073
Producer: HiLAB-Portugal
  • The knife sharpness tester is mounted in a position with a vertical edge and a specially developed synthetic paper package (Not included)...
Buy product
Elastics Repeated Extension Tester
Model: H017
Producer: HiLAB-Portugal
  • Assess the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear. according EN ISO 10768; SATRA TM103.
Buy product
Whole Shoe Flexometer in water
Model: H015
Producer: HiLAB-Portugal
  • This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.
Buy product
Dynamic Water-Resistance Tester
Model: H054
Producer: HiLAB-Portugal
  • The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.
Buy product
Heel Fatigue Tester
Model: H084
Producer: HiLAB-Portugal
  • The machine is controlled by a touch screen, through which is inserted the test parameters.
  • An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.
Buy product
Chainsaw Cutting Tester
Model: H070
Producer: HiLAB-Portugal
  • Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.
Buy product
Vamp Flexometer with 12 stations
Model: H010
Producer: HiLAB-Portugal
  • Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25
Buy product
Martindale Abrasion Tester with 4 stations
Model: H062
Producer: HiLAB-Portugal
  • The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it’s mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2; TM 31.
Buy product
Water Vapour Absorption Tester
Model: H052
Producer: HiLAB-Portugal
  • The water vapor absorption meter is mainly used to measure the water vapor absorption of different types of skin.
Buy product
Heel Impact Tester
Model: H085
Producer: HiLAB-Portugal
  • Installing the appropriated support, this equipment can also perform the impact resistance test on rigid soles.
Buy product
BALLY Penetrometer
Model: H033
Producer: HiLAB-Portugal
  • The machine has an automatic intrusion system that generates alerts when intrusion occurs. This automated system, controlled individually, station by station, can...
Buy product
Longitudinal/Torsional Stiffness of complete footwear
Model: H031
Producer: HiLAB-Portugal
  • This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.
Buy product
Crockmeter Tester hand driven
Model: H066
Producer: HiLAB-Portugal
  • This equipment consists of a base on which the test sample is fixed. A sliding mechanism is arranged to traverse a finger along the sample.
  • The end of the finger is covered with a piece of cloth and a load is applied to the finger during the sliding motion. Depending on colour of test sample, the abradant cloth should be white or black.
Buy product
Customers
Partners
Zalo
Hotline
Bản đồ
Youtube