Water Vapour Absorption Tester

Ứng dụng sản phẩm
Thông số kỹ thuật
Tiêu chuẩn
Video

Ứng dụng sản phẩm

Determining the coefficient of water vapour on leather and non-leather upper (water vapour absorption), according EN ISO 20344:6.7; EN ISO 17229; ISO 17699; TM172.

Thông số kỹ thuật

Weigh the conditioned test sample and record the mass as m1.
Place 50 ml of water into the container and place the test piece over the container with the side facing the foot downwards.
Place the impermeable disc over the test piece and screw down firmly.
Ensure that no water laps against the bottom of the test piece.
Remove the test piece after 8 h and weigh immediately, recording its mass, m2.
Calculate the water vapour absorption using the formula W₁= (m₂-m₁)/a.

Tiêu chuẩn

EN ISO 20344:6.7;
EN ISO 17229;
ISO 17699;
TM172.

Video

Please contact us for advice and support
⇒ Mr. Ba: 0948.27.99.88

⇒ Or leave a message and we will call you directly. Thank you very much!

Other products

Longitudinal/Torsional Stiffness of insole back parts and shanks

Model: H030

Producer: HiLAB-Portugal

Determine the stiffness of steel shanks, used as reinforcement in footwear

Buy product

Heel Fatigue Tester

Model: H084

Producer: HiLAB-Portugal

The machine is controlled by a touch screen, through which is inserted the test parameters.
An overshoot cut-out device will stops the machine automatically when the heel broken completely and the number of impacts till failure is recorded.

Buy product

Circular Blade Cutting Resistance Tester

Model: H071

Producer: HiLAB-Portugal

The shoe upper and glove shear strength testing machine is specially used to test the shear strength of shoe uppers, protective gloves, leather, etc... ...

Buy product

Radiant Heat Tester

Model: H048

Producer: HiLAB-Portugal

Determine the behavior of the materials used in protective clothing when exposed to a radiant heat source, according EN ISO 6942.

Buy product

Rigidity Tester for soles

Model: H012

Producer: HiLAB-Portugal

Assess the longitudinal rigidity of complete footwear to determine if “Bennewart” flexing test should be done, according EN ISO 20344:8.5 and ISO 17707.

Buy product

Longitudinal/Torsional Stiffness of complete footwear

Model: H031

Producer: HiLAB-Portugal

This equipment is also pre-prepared to perform the test to determine the torsional stiffness, according SATRA TM 256. For this purpose it is necessary acquire the appropriated device.

Buy product

Heat Insulation Tester

Model: H028

Producer: HiLAB-Portugal

This device is supplied with all the necessary accessories to perform the test: Temperature probe, steel ball and sand.

Buy product

Rotating Rub Fastness Tester

Model: H065

Producer: HiLAB-Portugal

Machine is supplied complete with cutting die to cut the samples.

Buy product

Ankle Shock Absorption Tester

Model: H082

Producer: HiLAB-Portugal

The striker and anvil are interchangeable to fulfil the requirements of the standards indicated above.

Buy product

BATA BELT Flexing Tester

Model: H013

Producer: HiLAB-Portugal

Determine the resistance of footwear soles to crack initiation and growth due to repeated flexing, under room temperature, according ISO 16177; SATRA TM133

Buy product

Lace to Eyelet Abrasion Tester with 6 stations

Model: H068

Producer: HiLAB-Portugal

Purpose – assess abrasion resistance of footwear laces, tested against standard eyelets, according to BS 5131:3.6; TM 93.

Buy product

Whole Shoe Flexometer in water

Model: H015

Producer: HiLAB-Portugal

This equipment is mainly used to assess the resistance of the complete footwear to water penetration during walk but can be also used to assess the flexing endurance of complete footwear in wet and dry conditions.

Buy product

Martindale Abrasion Tester with 9 stations

Model: H062

Producer: HiLAB-Portugal

The present equipment “MARTINDALE Abrasion Machine” is intended to determine resistance of a material to wet and dry abrasion and it is mainly applicable to fabrics, coated fabrics and leathers but it can be used with any flexible sheet material used for footwear, clothing, gloves and many other products, according to ISO 12947-1; EN ISO 5470-2; EN ISO 20344:6.12; EN ISO 17704; EN ISO 12945-2.

Buy product

Thickness Measuring Gauge for leather

Model: H046/1

Producer: HiLAB-Portugal

Used to measure the thickness of leather panels, measure the thickness of details in leather products to calculate the increase or decrease in product thickness.

Buy product

Rub Fastness Tester with 2 stations

Model: H064

Producer: HiLAB-Portugal

Machine has a lateral displacement device which allows perform two tests in each sample, without need move the samples, when is used only one finger test.

Buy product

Dynamic Water-Resistance Tester

Model: H054

Producer: HiLAB-Portugal

The water resistance tester is used to test the water resistance of fabrics and waterproof materials by performing it at hydrostatic pressure.

Buy product

Vamp Flexometer with 12 stations

Model: H010

Producer: HiLAB-Portugal

Determine the propensity of upper materials to crack, according ISO 4643:Met.B; ISO 5423:Met.B; ISO5402-2; SATRA TM25

Buy product

Chainsaw Cutting Tester

Model: H070

Producer: HiLAB-Portugal

Assessing the resistance to cutting of protective clothing, footwear and gloves by hand-held chainsaws.

Buy product

Water Vapour Permeability Tester

Model: H050

Producer: HiLAB-Portugal

The leather water vapor permeability meter is used to determine the water vapor permeability of leather and textile fabrics. It is applicable to all...

Buy product

TABER Abrasion Tester

Model: H061

Producer: HiLAB-Portugal

Determine the abrasive wear resistance of leather, coated materials, textiles, and fabrics, to assess the suitability for the end use, according to ISO 17076-1; ISO 5470-1; ASTM D-3884.

Buy product